Best Automated Visual Inspection Machines for Vials and Syringes
Stay updated with us
Sign up for our newsletter
Automated visual inspection (AVI) is the last check between a filling line and a patient. Catching defects is table stakes. The harder problem is catching them without rejecting good product, and getting a new product’s recipe running without months of tuning.
That is how we ranked this year’s machines: ease of configuration and the balance between detection accuracy and false eject rate came first, raw speed second. Vials and syringes are ranked separately, because the best machine for one is often not the best for the other.
Top picks for vials
| # | Machine | Best for | Max speed |
|---|---|---|---|
| 1 | Dabrico DAI-50 | Fastest setup; difficult-to-inspect products | 50/min |
| 2 | Körber Seidenader VI | High-volume vial lines adding AI | 600/min |
| 3 | Syntegon AIM 9 | Offline recipe development; integrated CCIT | 600/min |
| 4 | Stevanato Group MAVIS Combi | Suspensions and mixed container formats | 400/min |
| 5 | Brevetti CEA K32S | Oily, suspension and freeze-dried products at speed | 600/min |
| 6 | Antares Vision VRI VI | Pairing inspection with serialization | 400/min |
Top picks for syringes
| # | Machine | Best for | Max speed |
|---|---|---|---|
| 1 | Dabrico DAI-50 | Translucent plastic syringes; small and mid-size batches | 50/min |
| 2 | Syntegon AIM 5 integrated syringe line | Proven, validated AI in production | 300/min |
| 3 | Körber Seidenader VI-S / MS-S | Highest nested-syringe throughput | Up to 1,000/min with DE.SY.RE 1000 |
| 4 | Stevanato Group MAVIS Syringes | No-code operation by a single operator | 400/min |
| 5 | Brevetti CEA K15 DR | Zero-contact handling of glass and plastic syringes | 600/min |
| 6 | Antares Vision VRI VI for PFS | Full-barrel coverage and built-in re-inspection | 400/min |
How we evaluated providers
We scored each machine on four criteria, weighted toward what drives day-to-day cost and risk once a system is installed. Speed matters, but a 600-per-minute machine that needs weeks of recipe work for every new product, or that rejects 3% of good units, can cost more than it saves.
| Criterion | Weight | What we looked forSwitch to block editor |
|---|---|---|
| Ease of configuration | 35% | Units, images and expertise needed to build a recipe; time to a working recipe; offline recipe tools; no-code interfaces; changeover between formats |
| Detection vs. false eject balance | 35% | Published detection and false eject rates, ideally reported together; how the machine separates bubbles from particles; how AI models are trained and validated |
| Product and container range | 15% | Container types and sizes; clear liquids versus suspensions, viscous, lyophilized and powder products; molded glass and plastic |
| Throughput and line integration | 15% | Rated speed; de-nesting and re-nesting for syringes; integrated container closure integrity testing (CCIT) |
Our sources were vendor product pages, technical brochures, press releases, published case studies and trade press coverage, current as of November 2026. We did not bench-test the machines. Where a vendor publishes no figure, we say so rather than estimate.
We gave more credit to results tied to a specific product or customer than to “up to” claims. Every machine here can be configured well beyond its base specification, so treat our rankings as a shortlist. A feasibility study on your own product is the only result that should decide a purchase.
Best automated visual inspection machines for vials
1. Dabrico DAI-50
Best for: fastest setup and difficult-to-inspect vials
Dabrico, based in Bradley, Illinois, has built visual inspection equipment for 47 years. Its DAI-50 runs on Boon Logic’s AVIS platform, which uses unsupervised machine learning. Rather than being taught what defects look like, it learns what a compliant vial looks like and flags anything that deviates.
Key strengths
- The DAI-50 builds an inspection recipe from 500 pre-inspected good units in under an hour, with no defect library, labeled images or vision engineer needed.
- Dabrico’s vial inspection machine targets under 1% false ejects on standard injectable products and under 3% on difficult ones. On powder-filled molded glass vials, it reports 98% detection at a 2.7% false reject rate.
- The DAI-50 can handle 1 mL to 1,000 mL molded and tubular glass, with clear and opaque liquids, suspensions, lyophilized cakes and powders, imaged by five 60 fps cameras.
- Recipes are frozen for validation, and Dabrico says sites qualify in under six weeks on average.
Considerations
- At 50 units per minute, it suits small and mid-size batches, and requires multiple units in parallel to handle 600-per-minute lines.
- Dabrico currently does not offer container closure integrity testing
2. Körber Seidenader VI
Best for: high-volume vial lines adding AI
Körber’s inspection business is the former Seidenader of Markt Schwaben, Germany. The VI is its highest-capacity vial platform, inspecting liquid and lyophilized product at up to 600 containers per minute. It carries up to 13 camera stations and up to 10 outfeeds for defect-based sorting.
Key strengths
- B.R.AI.N, Körber’s supervised deep learning, runs on the machine and can be retrofitted to existing systems. Körber says it cuts false ejects by up to 90% versus conventional inspection.
- Bubble-X uses light refraction to tell bubbles from particles. Körber reports it halves the average false reject rate, from 2% to 1%.
- Modular add-ons include HVLD leak detection and 3D inspection. The Switch 100 and Switch 500 run vials and nested syringes on one machine.
Considerations
- Supervised models train on classified defect images, so model building depends on your image library and Körber’s specialists.
- Körber’s AI figures are “up to” values without a named customer result.
- Pricing is quoted per project.
3. Syntegon AIM 9
Best for: offline recipe development and integrated CCIT
Syntegon, formerly Bosch Packaging Technology, launched the AIM 9 in February 2026. It inspects vials from 2 mL to 250 mL at up to 600 per minute. Particle detection uses Syntegon’s patented Static Division technology with area-scan and line-scan cameras.
Key strengths
- AIM PREP, a compact offline unit, replicates a full AIM setup, including camera, lighting and spin speeds. Teams build and tune recipes without stopping production.
- An optional bubble masking tool separates harmless bubbles from particles, and deep learning can be added.
- Container closure integrity testing is built in, with headspace gas analysis, HVLD or both.
- Syntegon has the strongest validated AI record in this list, covered in the syringe section below.
Considerations
- Deep learning is optional, so most recipes still rely on conventional vision tools and an experienced engineer.
- The AIM 9 is new, so references on this exact platform are still limited. Pricing is not published.
4. Stevanato Group MAVIS Combi
Best for: suspensions and mixed container formats
Stevanato Group, based in Piombino Dese, Italy, makes both glass containers and inspection machines. The MAVIS Combi inspects vials, syringes, cartridges and ampoules at up to 400 per minute. It fits up to 20 inspection stations into a compact footprint and takes vials up to 51.6 mm in diameter.
Key strengths
- Patented imaging is designed for suspensions and viscous or gel-like products, with top, side and bottom inspection of lyophilized cakes.
- Stevanato says the MAVIS interface needs no programming or scripting, and two HMIs simplify operation.
- Its optional AI platform claims up to 99.9% accuracy and a tenfold cut in false rejects.
- Integrated HVLD or headspace gas analysis covers closure integrity.
Considerations
- The AI platform is cloud-based on Microsoft Azure, which your IT and data integrity teams will need to review.
- Stevanato’s accuracy figures are platform-level claims, not customer results.
5. Brevetti CEA K32S
Best for: oily, suspension and freeze-dried products at speed
Brevetti CEA, based in Sovizzo, Italy, has built inspection machines since the 1950s. The K32S inspects vials, ampoules and cartridges up to 32 mm in diameter at 400 to 600 per minute. It handles water-like, oily, suspension and freeze-dried products.
Key strengths
- Cameras capture up to 100 images per particle inspection unit. Particle Trajectory Tracking uses motion prediction to separate particles from bubbles and cut false rejects.
- Brevetti AI Studio runs deep learning networks alongside traditional vision tools, and complies with 21 CFR Part 11 and EU GMP Annex 11.
- A hollow-spindle bottom view suits vaccines and suspensions. The K32S LD adds HVLD, and headspace gas analysis covers freeze-dried product.
Considerations
- Brevetti publishes no detection or false reject figures, so ask for feasibility data on your product.
- Recipe setup uses a guided parameterization tool, but still relies on vision expertise. Pricing is quoted per project.
6. Antares Vision VRI VI
Best for: pairing inspection with serialization
Antares Vision, based in Travagliato, Italy, became part of Crane NXT when that acquisition closed on March 31, 2026. Its Visual Rotating Inspection (VRI) unit inspects up to 400 liquid-filled glass containers per minute.
Key strengths
- Combined versions add HVLD, vacuum decay or pressure decay leak testing.
- It is the only machine here that can combine inspection with code verification, OCR/OCV and serialization.
- Optional Digital Factory modules add AI for inspection and predictive maintenance.
Considerations
- Antares publishes no detection or false reject figures for its vial machines.
- With the 2026 ownership change, confirm the service model and product roadmap before committing.
Best automated visual inspection machines for syringes
1. Dabrico DAI-50
Best for: translucent plastic syringes and small to mid-size batches
The same DAI-50 platform inspects prefilled syringes, including translucent plastic, which rule-based systems often struggle with. It trains the same way it does for vials: on good units only, so it can flag defects it has never seen.
Key strengths
- Dabrico reports 94.7% detection on translucent plastic syringes, including a 2,000-micron fiber that manual inspection had missed.
- In a published case study, a short-shot cap defect had gone unnoticed for weeks. Dabrico reports that syringe inspection with the DAI-50 caught it with 100% detection accuracy.
- Recipes take under an hour from 500 good units. One machine covers syringes, vials and ampoules, so mixed-format sites avoid a dedicated syringe line.
Considerations
- Tub-and-nest handling requires a separate add-on configuration.
2. Syntegon AIM 5 integrated syringe line
Best for: proven, validated AI in production
Syntegon’s AIM 5 series has inspected syringes for about 20 years. The integrated line adds a de-nester, a re-nester and AI that is selectable by default for flange, stopper and cylinder inspection. It runs up to 18,000 syringes per hour from a single HMI. For faster lines, the AIM DIRect de-nests, inspects and re-nests up to 600 syringes per minute.
Key strengths
- Syntegon installed one of the first validated AI inspection systems in Puerto Rico.
- Validated models are locked, encrypted and version-controlled, which simplifies change control.
- A pre-spin module reduces bubbles before inspection, and HVLD can be integrated for closure integrity.
Considerations
- Its supervised AI needs thousands of pre-labeled defect images to train a single model.Â
- The Amgen result covers one station at one customer, with no absolute detection or false reject rates published.
- Onsite-support from Syntegon is often required to configure and manage inspection machines due to their inherent complexity.Â
3. Körber Seidenader VI-S and MS-S
Best for: the highest nested-syringe throughput
The VI-S and MS-S are Körber’s syringe-specific platforms. They pair with the DE.SY.RE de-nesting and re-nesting system, and the DE.SY.RE 1000 handles nested syringes and cartridges at up to 1,000 per minute.
Key strengths
- B.R.AI.N deep learning includes explainable AI tools that show operators why the system made each decision.
- High-voltage modules test syringes for leaks and detect pierced needle shields.
- The Switch 500 runs vials and nested syringes on one machine at up to 500 per minute. Körber says this saves up to 40% versus two machines.
Considerations
- Similar to that of Syntegon, Korber’s AI-inspection platform is powered by supervised machine learning and requires thousands of labeled defects to train a model.Â
4. Stevanato Group MAVIS Syringes
Best for: no-code operation by a single operator
The syringe-only MAVIS inspects liquids, suspensions and gel-like products at up to 400 per minute. It carries up to 18 inspection stations and takes syringes up to 14.45 mm in diameter.
Key strengths
- Stevanato says its patent-pending interface needs no programming or scripting knowledge.
- De-nesters and re-nesters sit at the same end of the machine, so one operator can run it.
- Independently motorized spindles adjust rotation for each drug product, with no glass-to-glass contact.
- Stations cover particles, fill level, plunger, needle shield, closure and integrated leak detection.
Considerations
- Syntegon’s AI capability is weaker compared to Korber and Syntegon. Like its competitors, it require supervised machine learning (SML) to train its models which can take months of hands-on engineering from a data scientist.Â
- The 14.45 mm limit excludes larger-diameter syringes.
5. Brevetti CEA K15 DR
Best for: zero-contact handling of glass and plastic syringes
The K15 DR de-nests, inspects and re-nests glass and plastic prefilled syringes at 600 per minute, for liquid, viscous and gel products up to 14.45 mm in diameter.
Key strengths
- Syringes are picked one by one with no worm screws, which Brevetti says prevents bubble formation, a leading cause of false rejects.
- Gap compensation fills spaces left by rejected syringes, so only full nests leave the machine.
- Remote Parameterization and Validation (RPV), HVLD and an optional fail-safe reject verification system are available.
Considerations
- Brevetti publishes no detection or false reject figures for the K15 DR.
- Brevetti’s AI studio uses a variety of open-source neural networks which are computationally expensive and difficult to train for real-world production environments.Â
6. Antares Vision VRI VI for PFS
Best for: full-barrel coverage and built-in re-inspection
This VRI model inspects glass and plastic prefilled syringes up to 24 mm in diameter at up to 400 per minute. It handles water-like, oily, suspension, emulsion and gel products.
Key strengths
- A secondary carousel inspects the barrel’s dry zone for full surface coverage.
- Configurable re-inspection sends rejected syringes back through the machine, which Antares says cuts false rejects caused by process variation.
- Each station checks two syringes in parallel with two cameras, giving each unit longer inspection time.
- Patented HVLD, OCR/OCV and serialization can be added.
Considerations
- Antares publishes no detection or false reject figures, and AI is optional.
- Confirm service and roadmap after the 2026 Crane NXT acquisition.
Questions to ask a prospective automated visual inspection provider
Spec sheets list speeds and station counts. These questions get at what they leave out: how hard the machine is to configure, and what it costs in good product rejected.
Configuration
- What do you need from us to build a recipe: how many good units, how many defect samples, and how many labeled images?
- Who builds the recipe, and how long does a new product take to go from first samples to a production-ready recipe?
- Can we build and tune recipes offline, without taking the machine off the line?
- How long does a changeover between container formats take, and what change parts does it need?
Accuracy and false ejects
- What false eject rate do you see at the detection rate you’re quoting, on a product like ours?
- Will you run a feasibility study on our product, using our defect set and a holdback set of good units, and report both rates together?
- How does the machine tell air bubbles from particles, and how does it handle suspensions, lyophilized cakes or molded glass?
- Can rejected units be re-inspected automatically before they’re scrapped?
Validation and support
- How are AI models trained, locked and change-controlled? What triggers revalidation?
- What is the typical time from factory acceptance test to completed PQ, and what documentation do you supply?
- Is container closure integrity testing integrated, or will we need a separate system?
- Can we speak with a reference customer running a similar product at a similar volume?
- What does the full cost include: software licenses and their term, change parts, service and spare parts?
FAQs
What is automated visual inspection?
Automated visual inspection uses cameras, lighting and software to check every filled vial or syringe for particles, cosmetic defects and fill problems. It replaces or supports manual and semi-automated inspection booths, which are slower and depend on operator attention.
What is a good false eject rate?
It depends on the product. Körber puts the average for conventional systems at about 2%, and says fixed-threshold systems can reach 15%. Under 1% on clear liquids is a strong target. Suspensions, lyophilized products and molded glass usually run higher.
What’s the difference between supervised and unsupervised AI in inspection?
Supervised deep learning trains on images that experts have labeled as good or defective, so it needs a defect library. Unsupervised learning trains on good units only and flags anything that deviates. That makes it faster to set up and able to catch defects it has never seen.
Can one machine inspect both vials and syringes?
Yes. The Dabrico DAI-50, Körber Switch 100 and Switch 500, and Stevanato MAVIS Combi all handle both, which suits CDMOs and sites with mixed-format filling lines.
How long does it take to qualify an AVI machine?
It varies by machine, product count and site procedures. Plan for IQ, OQ and PQ after the factory and site acceptance tests. Dabrico, for example, says its sites qualify in under six weeks on average. Ask each vendor for its typical timeline and documentation package.
Does automated visual inspection test container closure integrity?
Not on its own. Cameras find visible defects, but leaks need methods such as high-voltage leak detection (HVLD), headspace gas analysis or vacuum decay. Many machines here offer these as integrated modules.
Which machine is fastest?
For nested syringes and cartridges, Körber’s DE.SY.RE 1000 reaches up to 1,000 per minute. For vials, the Körber Seidenader VI, Syntegon AIM 9 and Brevetti CEA K32S top out at 600 per minute.
Write to us editorial@demandmediaagency.com. to learn more about our exclusive editorial packages and programmes.